Information > Preparation and Integration

Conversion from Freebase to any liquid form for plugging

<< < (2/2)

physics envy:

Amounts needed for plugging seem all over the board.  Not sure if you're on any other 5meo groups, but some other larger groups have more experimenters and as far as I can tell, it seems most (though not all) people need more when plugging than when smoking.  Also, most people get longer experiences from it, but mine seem to be about the same length as smoking.  Nottwo seems to luckily be on the more sensitive end of the scale.

And although it seems to take ~5 minutes to come on for most people, a few have said it came on within 60-90 seconds and they were NOT prepared and situated yet.  (Just wanted to give you a heads-up.)

This ROA just seems really variable from start out extremely low and see if you feel anything.  If nothing, double/triple your dose and try again :-)

As far as my smoking requirements, I guess I can't be sure if my FB has lost any potency over time or not, so that's a possibility.  Also, I find it pretty difficult to get an *ACCURATE* measurement with my $20 mg scale.  It's +/- 3mg accuracy, which is pretty big when using such a small amount.  So I weigh my dose several times to try to get a correct reading, but I don't have a jewelers scale like some on here do.  But assuming my FB is potent and my scale is accurate, when I've tried the 10-13mg level, I've always needed more to release.

Hopefully you're on the more sensitive side and can conserve your stash :-)

Let us know how it goes for you!

Thanks for the insights. I'm on a few groups and dosage for plugging is indeed all over the place. I've found a post (linked below) of someone who's really gone into depth with this ROA in general, and from what he says I get the sense that part of the variation between people is down to how they plug. Apparently the area of maximum absorption is pretty small, so the exact way you do it can place the substance right on the spot (100% immediate absorption) or just nearby (lower and slower absorption).


As for weighing, I've been experimenting with dissolving the FB in vodka, then evaporating it. I dissolved 100mg in 10ml (my $20 scales can weigh 100mg accurately enough), then I used a 1ml syringe to put exactly 1.5ml on a mirror and let it evaporate. I weighed it and it was spot on 15mg!!!

As for my plugging experiment in the coming days, I'm gonna start with 10mg, based on the theory that if I do it exactly right, it will be equivalent to 20mg vaped! If nothing at all happens, I'm gonna wait 2 hours then smoke 15mg with a mesh vape I built ([size=78%][/size])

My ego's got it all figured out, hahaha!


[0] Message Index

[*] Previous page

Go to full version